Water Level Sensor Liquid Float Switch Tank Pool Steel

Ships from Boston, MA, you will receive your item in a few days.
Brand New Liquid Level Sensor
Stainless Steel Construction
Resists Corrosion & Solvent
240V/0.5A/10Watts Maximum Capacity
(
Note
)
(A relay is needed to control a heavier load, such as a motor.  Please view my other listings for recommended relay.)
Vertical Mount
(Click
See other items
on the top-right of this page for
other available lengths
)
Install at either Top or Bottom of the Tank
NO
(Normally Open)
or
NC
(Normally Closed)
Convertible
by Simply Reversing the Float.  Combinations (see illustrations below):
Top mount, switch open when tank is full
Top mount, switch closed when tank is full
Bottom mount,
switch open when tank is empty
Bottom mount
, switch closed when tank is empty
Operation Voltage Range
0 to 240 V (AC or DC)
Max Current
0.5 A
Max Power
10 W
Max Temperautre
300 ºF
Min Temperautre
-40 ºF
Max Pressure
400 PSI
Min Specific Gravity
0.80
Your satisfaction is guranteed or your money back! (Item may be returned within 30 days upon delivery for a full refund of the closing bid.  Shipping and handling is not refundable.)
Note:
A small mechanical switch (aka. reed switch) sealed in the stationary
part of the sensor is activated by a small magnet in the moving part
(the float).  Therefore this sensor works with any voltage/current (AC
or DC) within the maximum limits specified above.
All voltage/current/power ratings are for resistive loads.
However, one should
always try to reduce the voltage and current applied on the sensor to a
level as low as possible in order to extend the life of the sensor. 
(For example, the Electrical Life is 5,000,000 cycles when the load is
5V, 10mA; 100,000 cycles when the load is 24V, 250mA)